» Underfloor Heating Clip Rail – Taped & Barbed

Adhesive Clip Rail

Clip rail track is ideal when using warm water underfloor heating within a screed or concrete floors.
The cliprail track is mounted on to the vapour – insulation with using the self adhesive rail backing and held in place whilst the
underfloor pipework is clipped in place. Holding Pins can also be used if required.

Supplied in 1 mtr. lengths simply push together each length to extend and snap off at pre-scored points to the required length.

A guide for the required amount is approximately area to be heated x 1.5 (i.e. 20 m² x 1.5 = 30 lengths)

Clip Rail is suitable for underfloor heating pipes from 15 mm – 20 mm outside diameter

Length – 1000 mm
Width  –     40 mm
Height –     25 mm
Colour – Black
Fixing Self Adhesive Tape and or holding pins
Material – Polypropylene..

——

Barbed Clip Rail

50 m x Rapid Fix Clip rail track is ideal when using warm water underfloor heating within a screed or concrete floors.

Each 1 mtr rail length can be joined by simply pushing together with a snap off point at every 100mm to get the appropriate length required.


The cliprail track is mounted on to the vapour – underfloor pipework is clipped in to place. Additional holding pins can also be used if required.
A guide for the required amount is approximately area to be heated x 1.5 (ie 20m² x 1.5 = 30 lengths)

Suitable for pipes from 15 mm – 20 mm outside diameter

Length – 1000 mm

Width – 40 mm

Fitted Height – 25 mm

Barb length 25 mm

Colour -Black

Material -Polypropylene.

For Bulk Orders please call us.